Do-It Molds : Melting Equipment for your lead fishing tackle

Do-It Molds
Melting Equipment

Zeiner's Home Page

 737 S. Washington #6 ~ Wichita, KS 67211 ~ (316) 265-5551


 View Order/Check Out

Main Product Index
Do-It Index

Jig Molds
Weedless Jig Molds
Lure Molds
Sinker Molds
Specialty Molds
Finished Tackle
Media & Books
Starter Kits
Melting Equipment
Hooks
Skirting Material
Tying Material
Wire Forms
Wire Eyes
Snaps & Swivels
Weed Guards
Paints & Coatings
Split Rings & Clevises
Lure Bodies & Beads
Tools
Blades
Lure Eyes
Roll Tape
Decals
Replacement Parts
Do-It Gear

Contact Us


Back To

Become a Fan of Zeiner's Angler Supply on Facebook

Follow Zeiner's Angler Supply on Twitter

  

 

Prop 65 WarningWARNING: Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm, and cancer. See instructions on Reducing Exposure supplied with product. - www.P65Warnings.ca.gov.

Do-It Molds Pro 4-20 Melter Lee Pro 4-20 - Holds 20 pounds of lead - 4" by 4" carbon steel pot - 4" of clearance below the spout - Not designed for molds that require wires to protrude above - 700 watts - 110 (1894) and 220 (1895) Volt AC available - 220 Volt comes without the plug $128.99 110 Volt
Qty.
$129.99 220 Volt
Qty.
Do-It Molds Production Pot IV Lee Production Pot IV - Holds approximately 10 lbs. of lead - 4" of clearance under the spout - It is a very good unit for making jigs weighing less than 1/2 oz. and can be used to mold sinkers up to one ounce in size - 500 watts - 110 (1901) and 220 (1896) Volt AC available - 220 Volt comes without the plug $107.99 110 Volt
Qty.
$111.99 220 Volt
Qty.
Do-It Molds Lee Magnum Melter Lee Magnum Lead Melter - Holds 20 punds of lead - Dip out style melter - 4" by 4" carbon steel pot - Works well with Large Cast Iron Ladle or the Lyman Casting Ladle - 700 Watts - 110 Volt AC (1890) $94.99 Qty.
Do-It Molds Lee Precision Lead Melter Lee Precision Lead Melter - Holds 4 pounds of lead - Works well with the Lee lead ladle - 500 watts - 110 (1903) and 220 (1899) Volt AC available - 220 Volt comes without the plug $79.99 110 Volt
Qty.
$81.99 220 Volt
Qty.
Do-It Molds Hot Pot 2 Hot Pot 2 - Melts and pours lead - Holds 4 pounds of lead - Melts and pours the lead - 3" by 1 3/4" melting pot - 3 foot cord - 120 Volts AC (1892) $73.99 Qty.
Do-It Molds Cast Iron Pot Lead Melting Cast Iron Pot - Large 20-lb. lead capacity. This 5" diameter cast iron lead melting pot holds twice as much metal as the average bullet pot. Recommended for all around use. (1904) $31.99 Qty.
Do-It Molds Cast Iron Pot

Currently unavailable

Large Lead Melting Cast Iron Pot - Designed to work in conjuction with our Large Ladle, this large lead melting pot will hold 50 lbs of lead. 8" diameter, 4" depth. Wire handle, pouring lip and tipping handle. Cast iron construction. (1887) - Shipping may need to be adjusted due to size of the pot.

 $--.-- Qty.
Do-It Molds Cast Iron Ladle Lead Melting Cast Iron Ladle - 2 different sizes available - 1911 model is 2 1/2" and holds up to 1 1/4 pounds of lead - 1905 model is 3" and holds up to 1 1/2 pounds of lead - Both feature left and right hand pouring lips $30.00 2 1/2"
Qty.
3"
Qty.
Do-It Molds Cast Iron Ladle Large Lead Melting Ladle - Holds 8 1/2 pounds of lead and has a 5" diameter - Steel Construction - 18" handle - L&R hand pour (1886) - Shipping may need to be adjusted due to the size of the ladle. $32.50 Qty.
Do-It Molds Steel Pot and Ladle Small Steel Pot (1888) and Small Ladle (1884) - Pot holds up to 5 pounds of lead. Ladle holds approx. 5 oz. of lead and features left and right hand pouring lips $5.00 Ladle
Qty.
$6.00 Pot
Qty.
Do-It Molds Lee Ingot Mold Lee Ingot Lead Mold - Four cavity - makes two 1/2 pound ingots and two 1 pound ingots (1893) $23.00 Qty.
Do-It Molds Fluxing Compound Clean Cast Lead Fluxing Compound - Lead fluxing compound will remove sand, dirt, sludge, oxidation and other impurities in your lead which will result in better castings. $19.00 Qty.
Do-It Molds Release Spray

Casting Release Spray - Release spray will apply a micon-sized graphite coating to the surface of your mold. Even though Do-it Molds do not require a release agent, this product will help the release of the castings in older or modified molds. - This product requres ground shipping. Shipping charge may be adjusted.

 $18.00 Qty.
Blaster Dry Graphite Spray

B'laster Graphite Dry Lubricant reduces wear to extend equipment life. It creates a quick drying film that provides long-lasting lubrication. It can be used to coat your lead mold for an easier release of the poured product. It is a dark gray lubricant that dries tack free. - This product requres ground shipping. Shipping charge may be adjusted.

 $7.99 Qty.
Input quantity for every item you would like then click add to cart

Prop 65 WarningWARNING: Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm, and cancer. See instructions on Reducing Exposure supplied with product. - www.P65Warnings.ca.gov.

Back to Do-It Molds Index

Back to Product Index
241128
    


737 S. Washington #6 - Wichita, KS 67211 - Phone (316) 265-5551 - Fax (316) 265-6668
Questions or problems with this website should be directed to webmaster